Stud Wall
Timber + plasterboard + insulation
Stud wall
Mark studs at: 0, 400, 800, 1200, 1600, 2000, 2400, 2800, 3200, 3600, 4000 (last stud, flush with the far end)
Reading 4 m
Reading 2.4 m
Reading 400 mm
Each deducts a 0.9 × 2.1 m opening from the board and insulation.
Results
What to buy — 6 items
Opens at Screwfix, Toolstation and the merchants for your trade. Free account, no card.
Take the whole job with you
A free account gets you the Gaffer for the awkward questions, a checklist for the job with every part on a shopping list, and quotes and invoices you can build and price up. Sending them out is Pro. No card needed.
Create your free accountIndicative design aids — the main figures and where each comes from are listed under "Figures based on" below.
Figures based on
- Studs, plates and one noggin row: Geometry — studs at the centres you set plus one, a head and sole plate the length of the wall, one noggin between each pair of studs
- Timber in 2.4 m pieces: No source — workshop estimate: a fixed estimating assumption (3.0 m and 4.8 m lengths also exist)
- Plasterboard 1200 × 2400 mm (2.88 m²): Typical — the common UK board size. Check the board you buy
- Board +10% for waste, 25 screws a board, tape 1 roll per 30 m², compound 0.4 kg/m²: No source — workshop estimate: fixed estimating assumptions. Check the board and compound makers' figures
- Insulation pack coverage (5.1, 8.4, 2.88, 6.0 m²): Typical — no data sheet retrieved. Check the coverage on the pack
- Door opening 0.9 × 2.1 m: No source — workshop figure: a fixed estimating assumption; the door count is an input
Indicative design aids. A standard is named with its edition; each is still to be checked against the published text. "Typical" means no standard sets it: check the bag, tin, data sheet or supplier named. "No source" means a workshop estimate: adjust to suit, or, where the box says it is fixed, a fixed estimating assumption.