Built for Groundworkers

AI Job Prep for Groundworkers

Drainage runs, footings, slabs, kerbs and manholes — describe the job and get the kit list, the volumes and the falls before the digger arrives. Concrete, pea gravel and Type 1 worked out, falls checked, trench support on the list.

Free plan, no card needed. Pro is £24/month, with 5 days to try it.

One Job, Start To Finish

Ask, work it out, buy it, tick it off — each step hands to the next. No app hopping.

01

Ask

"Drain run and manhole Tuesday — what do I need?" The Gaffer lists the plant, the permit to dig, the CAT scan and the trench support question before you break ground.

02

Work it out

Fall over the run at 1 in 40, pea gravel for bed and surround, concrete for the manhole base. Each number drops into the right calculator.

03

Buy it

Pipe, bends, gully, chamber rings, pea gravel and concrete land on a shopping list with a merchant link on every line.

04

Tick it off

The run sits on the job's checklist. Tick it as it goes in, share it with the machine driver, photograph it before backfill and invoice the stage.

What a Groundworker Checklist Looks Like

AI-generated in under 60 seconds from your job description. Every section editable, shareable, downloadable.

Confirm Before Leaving
Service plans requested and CAT and genny scan done
Permit to dig and RAMS signed
Trench support on site for anything over 1.2m
Building Control or the water company booked for the drain inspection
PPE & Safety
Hard hat, hi-vis, boots, gloves
Banksman for the digger
Ladder access into any trench
Dust and noise control for the cutter and wacker
Tools & Equipment
Laser level and staff, or a pipe laser
Wacker plate, disc cutter, breaker if needed
Shovels, rake, tamper, pipe cutter
Drain rods and test bung for the air test
Materials & Fixings
110mm pipe, bends, couplings, gully
Chamber base, rings, cover and frame
Pea gravel for bed and surround
Concrete for bases and haunching
Paperwork & Access
Drawing with invert levels
Permit to dig, RAMS, service plans
Inspection booked before backfill
Grab and muck-away arranged
Pro Tips
Set the invert at the outfall first and work back up the run
Photograph every joint before the surround goes on
Never leave an open trench unfenced overnight
On-Site AI Assistant

Need Help On Site?
Ask the Gaffer.

30 years of trade know-how in your pocket. Straight answers to on-site problems, specific to the job you describe — and it reminds you of the bits you'd only remember halfway there.

Instant trade-specific answers
Photo analysis for on-site problems
Safety-first with reg references

The Gaffer

Your AI site mate

"12 metres of 110mm foul drain — what fall do I need and how much pea gravel?"

For a 110 with a single WC on it, work to 1 in 40 — that is 300mm over 12 metres, so set the outfall invert and come back up 25mm a metre. For bed and surround, a 450 wide trench with 100 under and 150 over the pipe is about 2 cubic metres of pea gravel, call it 3 tonnes, four bulk bags. Get it inspected before you backfill and keep the photos.

Always verify to current regs. On-site conditions may vary.

Checklist to Shopping List. One Tap.

Tick the items you need, generate an instant shopping list sorted by category. No more wandering the wholesaler trying to remember fixings.

MaterialsFixings & FastenersConsumablesPPE & SafetyToolsMisc & Sundries

Common Questions

Does the drainage fall calculator do 1 in 40 and 1 in 80?

Enter the run length, the pipe type and the 1 in N gradient (the typical one is shown per pipe type: 1 in 40 for 100 to 110mm foul, 1 in 80 for 160mm, 1 in 60 for rainwater) and it gives the fall in millimetres and the bottom invert from the top one. It does not work a gradient back from two invert levels; ask the Gaffer for that, and for what Part H expects for the pipe size and the flow.

Does it know trench safety?

The groundworker persona references the HSE excavation guidance, NRSWA and shoring practice, and the checklist puts trench support and the CAT scan at the top. You remain responsible for the safe system of work.

Can I share the list with the machine driver?

Yes. On Pro you share the checklist by link or add the crew to a team, so the plant, the pipe and the permit are sorted before the digger is on the lorry.

Stop Forgetting Your Kit

Describe the job. Get a checklist. Leave prepared. It takes 60 seconds.

Free to start — no card needed Cancel anytime